vote buttons
0
1
beginner
0
intermediate
0
advanced

Through hole slip ring ---BTH1235

A slip ring is an electromechanical device that allows the transmission of power and electrical signals from a stationary to a rotating structure. A standard through hole slip ring can be used in any electromechanical system that requires rotation while transmitting power or signals. Its inner part rotates with a rotating shaft pass through the inner hole, so we call it " through hole slip ring".It can improve mechanical performance, simplify system operation and eliminate damage-prone wires dangling from movable joints.

Parameters:

Mechanical :

Working speed500rpm

Operating temperature-40℃~ +100℃

Contact materialPrecious metal

IP GradeIP 54

Electrical:

Circuit6 & 12

Current2A

Voltage240V or 380V

Dielectric strength≥1000V@50Hz between each circuit

Insulation resistance1000MΩ@ 500VDC

Electric noise≤7mΩ

Lead wire size26AWG, UL, color Teflon, silver or tin plated

Lead wire length200mm

Life-span120,000,000rounds

Dimension:

TYPERingsLengthIDOD

BHT1235-6623.6mmΦ12.7mmΦ35mm

BTH1235-121237.4mmΦ12.7mmΦ35mm

Features of Through hole slip rings  :

• Low noise

• Wear-resisting (Silver or gold  contacting)

• Good impact resistance

• Signal and current compatible

• Workable in hostile environment(-40℃~ +100℃)

• Flexible design for special requirements

Alternatives of  Through hole slip rings:

• Circuits

• Loading of each circuit

• Wire length

• Inner hole /outer hole diameter or length

• Working speed

• Gold contacting

• Housing color

Typical Applications of through hole slip rings:

Aerospace / Defense

• Armored vehicle turrets, IR and EO systems

• Missile seeker gimbals and inertial systems

• Helicopter de-ice systems, EO / IR trackers  and target systems

• Fixed-wing aircraft - EO / IR trackers, fire control systems, surveillance systems and targeting systems

• Missile counter measures

• Space - solar array mechanisms

• Shipboard / submersible - navigation systems and fire control radar

• Surveillance systems

Industrial

• Medical equipment and devices

• Robotics

• Index tables

• Semiconductor handling

• Pan tilt cameras

• Packaging and processing equipment

• Cable reels

• Wind energy

• CT scanners

Marine

• Remote operated vehicles (UAV/ROV/Drone)

• Seismic surveying

• Oceanographic winches

• Subsea communications and control

• Floating production, storage and offshore loading (FPSO)

• Diving

• Marine instrumentation

• Down hole / wire logging and drilling


Advantages of slip ring manufacturer---ByTune:

•Affordable price

•Quality guaranteed

•Response within 24 hours

•Prompt delivery

•Reliable package & shipment

•Flexible & quick customization

Delivery time and shipment:

•2 weeks ARO

•By UPS ,DHL or FedEx (depends on your location) 3 days door to door service

Installation Guide:

Proper use and mounting instruction:

◆Slip ring can not support the weight of equipment which connected with it, rotating equipment should be fastened so that its weight will not fall on the rotor.

◆No force to slip ring in the direction of parallel to axis.

◆No damage to the surface of lead wire while equipment rotating, all lead wire can not

bear weight while being aligned.

◆Because of possible geometric mismatching between the customer's system and the

slip ring, "hard mounting "of both ends of the slip ring (i.e., securing the rotor and stator such that is NO floating during operation) is not recommended and it may cause premature failure.

◆Without specifying, all parameter should be within the range of specification indicated, such as :

Working Speed

Voltage

Current

Dielectric Strength Protection Grade

◆It is very precise component, please do not disassemble it .

◆ If start working after long time storage, please rotate it 5-10 minutes non-load.

◆ While working, each circuit should be with protection of over-loading to avoid being burned.

Recommandation:

BTH0932

BTH1256

BTC035

Measurement and Test:


               3D Test                                                    Concentricity Test


        Electric noise Test                                                 Projecto


          Interference test                                               Reliable contact Testslip rings in stock suppliers

website:http://www.btslipring.com/standard-through-hole-slip-ring-1

04-Jul-2018 08:26 UTC
momu199
0

0 Answers

Related Questions